Ballast MH/HPS 250-600W + Super Par 10% - Dimmable - Superplant

Ballast for HPS or MH from 250W to 660W per Superplant

Superplant offers you its highly efficient, energy-saving All in One digital ballast.
It has a high power factor, high luminous efficacy and low THD.

For MH or HPS bulbs

The All in One digital ballast has been designed to light HPS and MH lamps .
Make sure that the lamp wattage and voltage match the specifications of the All in One ballast Superplant.
Its high operating frequency (60KHZ-130KHZ.) provides constant power output to the lamp, extending lamp life and increasing light efficiency.

Growing area: 150 x 150 cm
Flowering area: 120 x 120 cm

DIMMABLE DESIGN

This design can run one lamp at rated power and features a four-phase controller to set the ballast output to 250W, 315W, 400W, 600W or 660W. The latter power corresponds to the Super Par function, which will increase brightness by 10%.
Make sure you run your lamp continuously at 100% for 10 minutes before switching to other settings. Switching settings quickly can damage the lamp.

PROTECTION MECHANISM

This ballast is equipped with short-circuit protection, open-circuit protection, ignition failure protection and end-of-lamp-life protection technology.

Technical specifications

Lamp: 250-400W-600W lamps (MH/HPS)
Input power: 680W
Input voltage range: 176-264V
Input voltage: 220-240V
Input current: 3A
Input frequency: 50/60Hz
Max. output power: 660W
Output frequency: 60KHZ
Dimmer operation: 250W - 315W - 400W - 600W - 660W
Leakage current: 2.35mA
Total harmonic distortion: <8%
CF Lamp / peak factor: <1.6
Power factor: > 0.98
Open circuit voltage: 250Vrms
Operating frequency: 60KHZ-130KHZ
Ignition voltage: 3.5KV-4KV
Ignition time: 30MS
Inrush current: 6.5A
Current protection: 5A
Insulation resistance: 5MΩ
Insulation voltage: 3.5KV
Lamp failure detection: YES
Lamp power: Constant
Lamp flicker - acoustic resonance: NO
RF interference: NO
Max. case temperature: 80°C
Ambient temperature: -25 to 40°C
Operating humidity: 20% - 95%
IP environment required: IP23
Unit weight: 2.2 Kg
Unit dimensions: 198 x 200 x 100mm