CMH/MH DE/HPS DE electronic ballast - 1000W - Calitek

Ballast for HPS DE, MH DE, CMH by Calitek

Calitek offers you its highly efficient, energy-saving digital electronic ballast.
It has a high power factor, high luminous efficacy and low THD.

For CMH, MH double ended or HPS double ended bulbs

The 1000W ballast has been designed to light ceramic metal halide (CMH), metal halide(MH) or high-pressure sodium(HPS) lamps.
Make sure lamp wattage and voltage match ballast specifications Calitek.
Its high operating frequency (100KHZ-160KHZ.) provides constant power output to the lamp, extending lamp life and increasing light efficiency.

Growing area: 150 x 150 cm
Flowering area: 120 x 120 cm

Information: The lamp voltage must have a capacity corresponding to the digital ballast.
For correct operation, the bulb must have a voltage of 200V to 300V

DIMMABLE DESIGN

This design can run a lamp at rated power and features a four-phase controller to set the ballast output to 350W (cmh), 400W, 440W or 600W or 660W (hps/mh). This last power corresponds to the Super Par function, which will increase brightness by 10%.
Make sure you run your lamp continuously at 100% for 10 minutes before switching to other settings. Switching settings quickly can damage the lamp.

PROTECTION MECHANISM

This ballast is equipped with short-circuit protection, open-circuit protection, ignition failure protection and end-of-lamp-life protection technology.

Instructions supplied with the product or downloadable from this page.

Technical specifications :

- Model: Digital 1000W double ended
- Compatible with : CMH 630 and 1000W - HPS Double ended 750 and 1000W - MH double ended 1000W
- Input power: 1150W
- Input voltage range: 175-265V
- Input voltage: 220-240V
- Input current: 5A
- Input frequency: 50/60Hz
- Max output power: 1100W
- Output frequency: 100KHZ
- Inverter operation: 600W-630W-660W-750W-1000W - Super PAR
- Leakage current: 2.35mA
- Total harmonic distortion: <8%
- CF Lamp / peak factor: <1.6
- Power factor: > 0.98
- Open circuit voltage: 250Vrms
- Operating frequency: 100KHZ-160KHZ
- Ignition voltage: 3.5KV-4KV
- Ignition time: 30MS
- Inrush current: 6.5A
- Current protection: 8A
- Insulation resistance: 3.5MΩ
- Insulation voltage: 3.5KV
- Lamp failure detection: YES
- Lamp power: Constant
- Lamp flicker - acoustic resonance: NO
- RF interference: NO
- Max case temperature: 80°C
- Ambient temperature: -25 to 40°C
- Operating humidity: 20% - 95%
- IP environment required: IP23