Air extractor Prima Klima 125 mm 400 m³/h thermostat + variator

This Prima Klima centrifugal air extractor is designed with backward curved blades and an aerodynamically optimized housing for high performance.

Equipped with a climate controller you can choose your ideal temperature and vary the speed of the extractor according to the temperature thanks to its thermostat.
You set your ideal temperature from 20 to 30 degrees and the speed from 0 to 100%.
- If the temperature exceeds your setting, the extractor will run at full speed.
- If the temperature is lower or equal to your setting, the extractor turns at the desired setting (from 0 to 100% of the extractor's power)

The thermostat and the variator are connected to a remote temperature probe of 2 meters length.
The thermostat and the variator can be used together or separately.

You can also vary the speed of the extractor from 10 to 100% whatever the temperature. You will only use the power you need.

Technical data:
Model: PK 125-TC
Diameter inlet and outlet: 125 mm
Maximum airflow: 400m3/h
Maximum output power: 60W
Input voltage: 230V, 50/60Hz
Input current: 0.26A
Maximum temperature: 42°C
Wall bracket supplied
Mains plug not supplied