Analog Thermostat Socket - Winflex ventilation

Analog Thermostat Plug

This analog thermostat will allow you to maintain an appropriate temperature for your culture.
Ideal for air conditioners and heaters.
The thermostat automatically operates the device to which it is connected.

How to use the plug:
First, plug in the unit and set the POWER switch to On.
Select the desired temperature through the temperature control knob by turning the knob clockwise or counterclockwise.
Then plug your unit into the socket on the front.
- If the setting is set to HEAT, the LED light will turn green to bring heat into the room if the temperature is below the desired temperature. When the room temperature reaches the desired temperature, the heater will turn off and the LED will turn red.
- If the setting is set for COOL, the LED will turn green to turn on the air conditioning in the room if the temperature is above the desired temperature setting. When the room temperature reaches the desired temperature, the air conditioner will turn off and the LED indicator will turn red.

Technical specifications:
Operating voltage: 230V AC / 50Hz;
Load (Max): 16A 3680W - Resistive load; 9A@CosΘ=0.4 - Inductive load.
Operating temperature: 5°C ~ 70°C.
Temperature control range: 5°C (40°F) ~ 30°C (85°F)
Accuracy: ± 1°C