Air extractor VK 125 U 360 mc/h thermostat and integrated dimmer - Winflex

Tubular extractors designed for the ventilation of medium or large installations

It is equipped with a climate controller that allows you to choose an ideal temperature and to vary the speed of the extractor according to the temperature thanks to its thermostat.
You set your ideal temperature (from 20 to 30 degrees) and the speed (from 0 to 100 %) of your extractor
If the temperature exceeds your setting, the extractor will run at full speed. If the temperature is lower than or equal to your setting, the extractor turns at the desired setting (from 0 to 100% of the extractor's power)

This extractor will allow you to perfectly control your growing space because it will turn on the extractor at 100% of its speed only when the temperature exceeds your setting.
The thermostat and the variator are connected to a remote temperature probe of 4 meters long.
The thermostat and the dimmer can be used together or separately. You can also vary the speed of the extractor from 10 to 100% whatever the temperature.
You will only use the power you need.

Diameter: 125 mm at the inlet (intraction) and outlet (extraction)

The extractors can be mounted horizontally and vertically, its very resistant structure reduces noise pollution.

Composed of a motor with external rotor on ball bearing, allows to obtain a balanced turbine for a quality material!

Centrifugal runners with backward curved blades

Mounting bracket included

IP 44 motor protection

Operates between -25 and +55C°

iEC male plug (supplied)

ERP features: (pictured)

The technical parameters on the ErP energy label and the declaration of performance (DoP) are listed for fan operation at an external pressure of 100 Pa according to EN13141-7:2010