Air extractor VK 150 U - 460mc/h thermostat and integrated dimmer - Winflex
Product details
Winflex tubular extractors designed for the ventilation of medium or large installations.
It is equipped with a climate controller that allows you to choose an ideal temperature and to vary the speed of the extractor according to the temperature thanks to its thermostat. You set your ideal temperature (from 20 to 30 degrees) and the speed (from 0 to 100%) of your extractor.
If the temperature exceeds your setting, the extractor will run at full speed.
If the temperature is below or equal to your setting, the extractor will run at the desired setting (from 0 to 100% of the extractor's power).
This extractor will allow you to perfectly control your growing space because it will turn on the extractor at 100% of its speed only when the temperature exceeds your setting.
The thermostat and the variator are connected to a remote temperature sensor of 4 meters length. The thermostat and the dimmer can be used together or separately.
You can also vary the speed of the extractor from 10 to 100% whatever the temperature. You will only use the power you need.
- Diameter: 150 mm in input (intraction) and output (extraction)
- Winflex VKU extractors are also very quiet
- Length of the cable of the remote temperature sensor included: 3 meters
- Power supply: male IEC plug (supplied)
ERP features: (in photo)
The technical parameters on the ErP energy label and the declaration of performance (DoP) are listed for fan operation at 100 Pa external pressure according to EN13141-7:2010
datasheet
Name | Air extractor VK 150 U - 460mc/h thermostat and integrated dimmer - Winflex |
Brand | Winflex |
Composition | Plastic |
Eco-contribution (€) | 0,42 |
Air flow | 401 to 800 m3/h |
Output diameter (mm) | 150 |
Inlet diameter (mm) | 150 |
Country of manufacture | UKRAINE |
Tri des déchets |
Nos emballages/produits peuvent faire l’objet d’une consigne de tri. En savoir plus.
|